BVYCF - ULTRA-DUTY GREASE EP NLGI 2, CPS238011
- MSDS: BVYCF
- Manufacturer: CHEVRON
- Product Name: ULTRA-DUTY GREASE EP NLGI 2, CPS238011
- National Stock Number: 9150-00N054999
Product Identification
Product ID:ULTRA-DUTY GREASE EP NLGI 2, CPS238011
MSDS Date:03/22/1992
FSC:9150
NIIN:00N054999
MSDS Number: BVYCF
Responsible Party
US
Emergency Phone: 800-457-2022
Info Phone: 800-582-3835
Cage: 0AHD1
Contractor
Telephone: 800-582-3835
Cage: 0AHD1
Ingredients
MINERAL OIL, HYDROTREATED (SEVERE), HEAVY NAPHTHENIC
CAS: 64742-52-5
RTECS: PY8035001
Fraction By Weight: >70%
OSHA PEL 5 MG/M3 (MFR)
ACGIH TLV: 5 MG/M3 (MFR)
MINERAL OIL, PETROLEUM DISTILLATES, HYDROTREATED (SEV),
CAS: 64742-54-7
RTECS: PY8035501
OSHA PEL 5 MG/M3 (OIL MIST)
ACGIH TLV: 5 MG/M3 (OIL MIST)
ADDITIVES
Fraction By Weight: <30%
OSHA PEL N/K
ACGIH TLV: N/K
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYE/SKIN CONT:THIS SUBSTANCE IS NOT
EXPECTED TO CAUSE PRLNG/SIGNIFICANT IRRIT. DERMAL TOX:IF ABSORBED
THRU SKIN, THIS SUBSTANCE IS CONSIDERED PRACTICALLY NONTOX TO
INTERNAL ORGANS. HIGH-PRESS EQUIP IN FO:ACCIDENTAL HIGH-VELOCITY
INJECTION UNDER SKIN OF MATLS OF THIS TYPE MAY RSLT IN SERIOUS
INJURY. SEEK(EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ:MED ATTN AT ONCE SHOULD ACCIDENT LIKE
THIS OCCUR. INITIAL WOUND AT INJECTION SITE MAY NOT APPEAR TO BE
SERIOUS AT FIRST; BUT, IF LEFT UNTREATED, COULD RSLT IN
DISFIGUREMENT/ AMPUTATION OF AFF ECTED PART. INHAL/INGEST:SYSTEMIC
TOX OF THIS SUBSTANCE HAS NOT BEEN DETERMINED. HOWEVER, IT SHOULD
BE (SUPP DATA)
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:INHAL:REMOVE TO FRESH AIR. SUPPORT BRTHG (GIVE O2/ARTF RESP)
. EYE:FLUSH W/FRESH WATER FOR AT LST 15 MINS. REMOVE CONT LENSES IF
WORN. SKIN:WASH THORO W/SOAP & WATER. REMOVE & WASH CONTAM CLTHG.
INGEST:GIVE WATER/MILK TO DRINK & TELEPHONE FOR MED ADVICE. CONSULT
MED PERS BEFORE INDUCING VOMIT. IF MED ADVICE CANNOT BE OBTAINED,
THEN TAKE PERS & PROD CNTNR TO NEAREST MED EMER (SUPP DATA)
Fire Fighting
Extinguishing Media:CO2, DRY CHEMICAL, FOAM, WATER FOG.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT .
Unusual Fire/Explosion Hazard:NORMAL COMBUST FORMS CARBON DIOXIDE,
WATER VAPOR & MAY PRODUCE OXIDES OF SULFUR, NITROGEN & PHOSPHOROUS.
INCOMPLETE COMBUST CAN PRODUCE CARBON MONOXIDE.
Accidental Release
Spill Release Procedures:THIS MATERIAL IS NOT EXPECTED TO PRESENT ANY
ENVIRONMENTAL PROBLEMS OTHER THAN THOSE ASSOCIATED W/OIL SPILLS.
CLEAN UP SPILLS IMMEDIATELY, OBSERVING PRECAUTIONS IN PROTECTIVE
EQUIPMENT SECTION.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:READ ENTIRE DOCUMENT & LABEL BEFORE
USING THIS PRODUCT. AVOID PROLONGED OR FREQUENTLY REPEATED SKIN
CONTACT W/THIS MATERIAL.
Other Precautions:DO NOT WELD, HEAT OR DRILL CONTAINER. RESIDUE MAY
IGNITE W/EXPLOSIVE VIOLENCE IF HEATED SUFFICIENTLY. CAUTION! DO NOT
USE PRESSURE TO EMPTY DRUM OR DRUM MAY RUPTURE W/EXPLOSIVE FORCE.
Exposure Controls
Respiratory Protection:NO SPECIAL RESPIRATORY PROTECTION IS NORMALLY
REQUIRED. HOWEVER, IF OPERATING CONDITIONS CREATE HIGH AIRBORNE
CONCENTRATIONS, THE USE OF A NIOSH/MSHA APPROVED RESPIRATOR IS
RECOMMENDED.
Ventilation:USE ADEQUATE VENTILATION TO KEEP AIRBORNE CONCENTRATIONS OF
THIS MATERIAL BELOW RECOMMENDED EXPOSURE STANDARD.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPROVED CHEM WORKERS GOGGS .
Other Protective Equipment:SKIN CONTACT CAN BE MINIMIZED BY WEARING
PROTECTIVE CLOTHING.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
EFTS OF OVEREXP:PRACTICALLY NON-TOX TO INTERNAL ORGANS IF
INHALED/SWALLOWED. THIS PROD CONTAINS PETRO BASE OILS WHICH MAY BE
REFINED BY VARIOUS PROCESSED INCL SEV SOLV EXTRACTION, SEV
HYDROCRACKING/SE V HYDROTREATING. FIRST AID PROC:TREATMENT CENTER
OR HOSPITAL.
Chemical Properties
HCC:V6
Solubility in Water:INSOLUBLE
Appearance and Odor:RED GREASE.
Stability
Stability Indicator/Materials to Avoid:YES
MAY REACT W/STRONG OXIDIZING AGENTS, SUCH AS CHLORATES, NITRATES,
PEROXIDES, ETC.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:NO DATA AVAILABLE.
Disposal
Waste Disposal Methods:PLACE CONTAMINATED MATERIAL IN DISPOSABLE
CONTAINERS & DISPOSE OF IN A MANNER CONSISTENT W/APPLIC REGS.
CONTACT LOCAL, STATE & FEDERAL ENVIRONMENTAL OR HEALTH AUTHORITIES
FOR APPROVED DISPOSAL OF THIS MATERIAL.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.